cores
radaremprego

Metrology & Laboratory Specialist

Regimepresencial
Horáriosem indicação no anúncio
Contratoefetivo
não indicado no anúnciosalário
anunciado há 30 dias

Onde

Ovar (Aveiro)

Sabes onde fica? Indica o local (4 empresas confirmadas = 1 mês de Plus)

Entra e indica onde moras para ver o tempo de viagem.

Renda mediana
T1 ≈ 380 €/mês 50 m²
T2 ≈ 560 €/mês 75 m²
7,50 €/m²
novos contratos dos últimos 12 meses, INE 2.º trimestre de 2026; anúncios atuais pedem em geral mais.

Em resumo IA

Metrology & Laboratory Specialist na fábrica da Yazaki em Ovar. Inspeção dimensional 2D/3D, ensaios laboratoriais e gestão de equipamentos de medição, em ambiente de indústria automóvel.

Descrição

anúncio longo (4 139 caracteres): a IA resumiu-o; o texto integral está no separador ao lado.

Função
Realizar e analisar inspeções dimensionais 2D e 3D e ensaios laboratoriais, garantindo resultados fiáveis e conformidade com requisitos internos e de clientes. Gerir a calibração, manutenção e verificação dos equipamentos de medição e ensaio. Apoiar estudos de análise de sistemas de medição (MSA/R&R), investigar reclamações de qualidade internas e de clientes, implementar ações corretivas e preventivas, participar em auditorias e comunicar diretamente com clientes internos e externos.
Requisitos
  • Formação técnica em Metrologia, Engenharia Mecânica, Engenharia Industrial, Qualidade, Mecatrónica ou área técnica afim.
  • Experiência profissional em metrologia, inspeção dimensional ou laboratório, preferencialmente na indústria automóvel.
  • Conhecimentos sólidos de inspeção dimensional 2D e 3D e de máquinas de medição por coordenadas (CMM).
  • Capacidade de ler e interpretar desenhos técnicos, tolerâncias e GD&T.
  • Conhecimentos de gestão de calibração de equipamentos de medição.
  • Conhecimentos básicos de ferramentas estatísticas, SPC e MSA/R&R.
  • Bom conhecimento de Microsoft Office.
  • Inglês de nível mínimo B2, escrito e falado.
Valorizado
  • Experiência em tomografia computorizada por raios X (CT Scan).
  • Conhecimentos de IATF 16949 e requisitos de qualidade automóvel.
Condições
Contrato: não indicado
Salário: não indicado
Horário: não indicado
Local: Ovar (fábrica da Yazaki)
Benefícios
não indicados

Join Yazaki. Connect to the future. 

Country: Portugal (PT) 
City: Ovar
Worksite / Location: Ovar Plant 

Job Function: ECS_Quality & SQ 
Job Discipline:  
Job Family: Operational Quality (PL)

Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a Metrology & Laboratory Specialist in our plant in [[location]].

We are looking for a skilled and proactive Metrology & Laboratory Specialist to support dimensional inspection, testing, equipment management and quality activities within an automotive industry environment.
The selected candidate will be responsible for performing and analysing dimensional inspections and laboratory tests, ensuring reliable results, compliance with internal and customer requirements, and continuous improvement of laboratory and metrology processes.


Main Responsibilities
•    Perform 2D and 3D dimensional inspections using appropriate measurement equipment and techniques.
•    Perform dimensional inspection and analysis using X-Ray Computed Tomography (CT Scan).
•    Read and interpret technical drawings, specifications, tolerances and GD&T requirements.
•    Analyse test methods, perform tests, evaluate results and prepare technical test reports.
•    Ensure the correct management, calibration, maintenance and verification of measurement and test equipment.
•    Support Measurement System Analysis activities, including R&R studies.
•    Develop and update equipment operating instructions, internal test methods and laboratory procedures.
•    Identify abnormalities during testing or inspection activities, perform initial analysis and support the definition of corrective actions.
•    Support the investigation and analysis of internal and customer quality claims.
•    Implement corrective and preventive actions and verify their effectiveness.
•    Participate in internal and external audits.
•    Ensure compliance with Quality, Environmental, Health & Safety and Laboratory Management System requirements.
•    Maintain laboratory organization and 5S standards.
•    Communicate directly with internal and external customers regarding technical clarification, test status and priorities.
•    Identify and propose improvements to inspection methods, testing processes and laboratory efficiency.
•    Support the preparation of test costs and quotations when required.


Candidate Profile
•    Technical education in Metrology, Mechanical Engineering, Industrial Engineering, Quality, Mechatronics or a related technical field.
•    Previous professional experience in metrology, dimensional inspection or laboratory activities, preferably within the automotive industry.
•    Strong knowledge of 2D and 3D dimensional inspection.
•    Strong ability to read and interpret technical drawings, tolerances and GD&T.
•    Experience with Coordinate Measuring Machines (CMM) and dimensional measurement equipment.
•    Experience with X-Ray Computed Tomography (CT Scan) will be highly valued.
•    Knowledge of calibration and measurement equipment management.
•    Basic knowledge of statistical tools, SPC and Measurement System Analysis (MSA/R&R).
•    Knowledge of IATF 16949 and automotive quality requirements will be valued.
•    Good knowledge of Microsoft Office tools.
•    Good level of English, minimum B2, both written and spoken.

At Yazaki, we are committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship. 

We are looking forward to receiving your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application! 

Ps. Didn't find what you are looking for?
Take a look at our careers page! Be careful though, you might find your next dream job. 

Como me candidatar

Candidatura através do botão 'Apply Now' no anúncio. Prazo e data de início não indicados. IA

Candidatar no anúncio original ↗

Preparar candidatura

Uma carta de apresentação e uma apresentação curta para esta oferta, escritas a partir do teu perfil, e o que aprender a seguir.

Entra e cria o teu perfil a partir do CV. É privado: não o partilhamos com ninguém.

Algo errado ou ilegal neste anúncio? Reportar

Fica visível enquanto analisamos. Decidimos em até 7 dias (o que é claramente ilegal, como uma burla, mais depressa) e dizemos-te o resultado e porquê.

Ofertas semelhantes

Salário comparado

Este anúncio não indica salário. As 16 ofertas de Técnicos das ciências químicas e físicas com salário em Portugal anunciam:

mediana 1123 € · metade entre 1000 € e 1225 €

ver as que pagam mais →

Salários brutos mensais anunciados em ofertas abertas a tempo inteiro, da mesma profissão. Não é uma estimativa para esta oferta.

Formação para esta vaga

Requisitos IA

  • Ensino técnico em Metrologia, Engenharia Mecânica, Industrial, Qualidade ou Mecatrónica
  • Experiência em metrologia, inspeção dimensional ou laboratório
  • Conhecimento de inspeção dimensional 2D e 3D
  • Leitura e interpretação de desenhos técnicos, tolerâncias e GD&T
  • Experiência com Máquinas de Medição por Coordenadas (CMM)
  • Conhecimento de gestão de calibração e manutenção de equipamentos
  • Conhecimento básico de ferramentas estatísticas, SPC e MSA

Publicado em (1)

Onde a empresa está ver no mapa →

segundo outras ofertas da empresa, locais no OpenStreetMap; não é necessariamente o local desta oferta.

Vista pela primeira vez a 18 out, 04:43

letra A/B